15H High Pressure Direct Mounting0 pages

"

Model: 15H

nnnn

SMALL DIAL - HIGH PRESSURE

nnnn

INDUSTRIAL SERVICE GAUGE

nnnn

The model 15H is manufactured to meet the demand for small

nnnn

high quality gauges designed for applications using gases,

nnnn

water or any liquid that does not attack brass and bronze.

nnnn

The one piece polycarbonate case with Integral window forms a

nnnn

solid baffle In front of the Bourdon tube and Incorporates a full

nnnn

diameter stainless steel blow-out back so that In the event of a

nnnn

tube failure through corrosion, explosion or gross over pressure

nnnn

any vapour or debris Is vented from the back of the case.

nnnn

This gauge Is designed for direct mounting on to the process

nnnn

pipe work and comes with a grey Inner sleeve to give a grey

nnnn

colour to the side of the case.

nnnn

For oxygen applications these gauges must be manufactured to

nnnn

ensure they are entirely free from oil and grease.

nnnn

Size

nnnn

63 mm & 80mm Dial diameter

nnnn

Mounting

nnnn

Direct

nnnn

Case & Bezel

nnnn

One Piece Polycarbonate, Safety Pattern case

nnnn

Scale Ranges

nnnn

0 to 1 Bar, up to 600 Bar Pressure

nnnn

Equivalent units of pressure / vacuum available

nnnn

Single and dual scales are available

nnnn

Pressure Element

nnnn

316 Stainless Steel helical coll brazed to the body and with

nnnn

welded end piece

nnnn

Overload

nnnn

Pressure Connection

nnnn

1/4" BSP as Standard

nnnn

1/8", 1/4" &3/8" BSP & NPT are also available

nnnn

Accuracy Class

nnnn

CL:1 1.0% of FSD as defined In EN837-1

nnnn

Temperature

nnnn

Operating: -20 to +90 °C

nnnn

Storage: -40 up to +100 °C

nnnn

Options: for lower or higher operating temperatures, please

nnnn

contact our Sales Office

nnnn

Temperature Effect

nnnn

Variation In Indication caused by temperature shall not exceed

nnnn

± 0.04 X (t2 -11 )% of the span where:

nnnn

t1 Is the reference ambient temperature In degrees Celsius

nnnn

t2 Is the ambient temperature In degrees Celsius

nnnn

HBudenberg

nnnn

Dial

nnnn

White Anodlsed Aluminium marked In black finish

nnnn

Option: Dual scale, colour bands & sectors

nnnn

Customisation with Company Name & Logo also available

nnnn

Pointer

nnnn

Stainless steel coloured black

nnnn

Movement

nnnn

Brass Construction

nnnn

Option : Viscous Damped movement to overcome the effects

nnnn

of minor pressure pulsations and vibrations

nnnn

Window

nnnn

One Piece Polycarbonate

nnnn

Environmental Rating

nnnn

IP54 as defined In EN 60 529

nnnn

Traceability

nnnn

All Instruments are Individually calibrated and have an unique

nnnn

Serial Number printed on the dial. A Certificate of Conformity

nnnn

Traceable to National Standards Is Supplied Free of Charge

nnnn

Certification available

nnnn

BS EN 10204 3.1 B Material Certification

nnnn

Point by Point Test Certificate

nnnn

Safety

nnnn

All units are manufactured to comply with EN 837-1, S3

nnnn

specification and other regulatory standards Including PED.

nnnn

Installation instructions

nnnn

Refer to EN 837-2

nnnn

Rev-02 April 2006

nnnn

Designed and Manufactured In UK.

nnnn

Datasheet BUD-003

"