V100E0 pages

"

Model: V100E

nnnn

VALVE ACCESSORIES & CONTROLS

nnnn

ELECTRO-PNEUMATIC POSITIONER

nnnn

@ Budenberg

nnnn

A line of pneumatic valve positioners incorporating over

nnnn

sixty years of design, manufacturing and marketing

nnnn

expertise, creating one of the most durable, reliable

nnnn

instruments on the market.

nnnn

This positioner can be ordered as a base pneumatic model

nnnn

but can be converted to a standard electropneumatic, IS, Ex

nnnn

or Fail Freeze model in a matter of minutes, without

nnnn

removing the unit from its installation.

nnnn

Accessories in the way of gauges, feedback modules or

nnnn

a raised indicator can be added in a matter of minutes.

nnnn

Maximum modularity equals maximum flexibility and with a

nnnn

simple design and quality components, the performance

nnnn

is a maximum as well.

nnnn

Input Signal

nnnn

4-20 mA ( Ri<250 ohms )

nnnn

Supply Pressure

nnnn

0.15 - 1MPa (21.8 - 145 PSI)

nnnn

Linearity Error

nnnn

<1.0% FS

nnnn

Hysteresis

nnnn

<0.6% FS

nnnn

Repeatability

nnnn

<0.5% FS

nnnn

Pressure Gain

nnnn

@ 600KPa (87PSI) according to ISA S75.13

nnnn

750 Pout/Pin 49% Pout/Pin

nnnn

Air Capacity

nnnn

@ 200KPa (29PSI)

nnnn

@ 600KPa (87PSI)

nnnn

@ 1MPA(145PSI)

nnnn

270SLM 9.5SCFM

nnnn

800SLM 28.3SCFM

nnnn

1350SLM 47.1SCFM

nnnn

Thread sizes

nnnn

Air connections

nnnn

Electrical entry

nnnn

Gauge ports

nnnn

1/4"G

nnnn

Optional 1/4" NPT

nnnn

M20

nnnn

Optional 1/2"NPT or PG13.5

nnnn

1/8" G

nnnn

Optional 1/8" NPT

nnnn

Ingress Protection

nnnn

IP66 (NEMA4X)

nnnn

Surface Finish

nnnn

Powder Polyester

nnnn

Weight

nnnn

1.7Kg (3.8lbs)

nnnn

Options

nnnn

Various Spindles for different actuators

nnnn

Various cams

nnnn

Gauges

nnnn

Feedback modules

nnnn

Indicators

nnnn

Bleed Rate

nnnn

@ 200KPa (29PSI)

nnnn

@ 600KPa (87PSI)

nnnn

@ 1MPA(145PSI)

nnnn

Temperature Range

nnnn

-40 to +85 Celsius (-40 to ■

nnnn

5.7SLM

nnnn

17SLM

nnnn

28.3SLM

nnnn

0.2SCFM

nnnn

0.6SCFM

nnnn

1.0SCFM

nnnn

185 Fahrenheit)

nnnn

Pilot Valves

nnnn

W1 Low Gain Pilot Valve, pressure gain 300 @ 600KPa

nnnn

Bleeds 33% less, air delivery 10% less than W3

nnnn

W2 High Gain Pilot Valve, pressure gain >1000 @ 600KPa

nnnn

Bleeds 33% more, air delivery equal to W3

nnnn

W3 Standard Pilot Valve, Air capacity and Bleed as left

nnnn

W1 for better stability, W2 for better response & accuracy

nnnn

Benefits

nnnn

Simple calibration. With the non-interactive zero and span

nnnn

adjustment and the external zero adjustment, calibration

nnnn

is simple and time saving.

nnnn

Flexibility. One housing for pneumatic or electro-pneumatic.

nnnn

The l/P can be installed or removed at any time. Multiple

nnnn

mounting capability. Standard indicator allows for air to

nnnn

open or air to close operation. Flat or raised indicator

nnnn

available. F05 standard housing with changeable drives.

nnnn

Benefits

nnnn

Maintenance friendly. The pilot valve assembly can be

nnnn

cleaned by removing one screw and can only be installed

nnnn

one way - the correct way. The gauge block is standard.

nnnn

I/P test point positioner loop testing.

nnnn

Durable. Cast Aluminium, polyester coated housing.

nnnn

Stainless steel retained fasteners. Double locked stainless

nnnn

steel cam. Quality internal parts. Unique electrical compartment

nnnn

fitted with an o-ring is pressure sealed by the cover.

nnnn

Rev-03 December 2006

nnnn

Datasheet VAC-002

"