عضویت 
ورود اعضا
راهنمای خرید
SL10.1040 pages
12-15V adjustable, 180W
Data sheet SilverLine
SL10.104
UL60950 E137006
CUL/CSA-C22.2
No 60950
• Input: AC 230/115V, DC 240...375V
• Output: 12-15V/180W
• PULS Overload Design™:
20% Power boost up to 215W;
high overload current,
no switch-off
• Robust mechanics and EMC
• DC ok LED
• Inrush current limiting and
Overtemperatur protection
Input
Input voltage
AC100-120/210-240V (Manual Select),
50-60 Hz
(AC 85...132/176...264V, DC 240...375V,
47-63 Hz)
<5A (switch in 115V position)
<2.3A (switch in 230V position)
AC 100V
AC 120V
AC 230V
Inrush current Ipk
37A
45A
51A
Fuse loading I²t
4.6A²s
6.8A²s
4.2A²s
Unit is internally fused (fuse not accessible). For external fusing of unit
and for input line protection, use circuit breaker with B-characteristic
10A or slower action, or alternatively T10A HBC fuse.
AC 100V AC 120V AC 230V
0.67
Output voltage
DC 12-15V, adjustable by (covered) front panel potentiometer; preset: 12V ±0.5%
Adjustment range guaranteed
Rated continuous loading with convection cooling
• Tamb=0°C - 60°C
12V/15A (180W) resp. 15V/12A
• Tamb=0°C - 45°C
12V/18A (215W) resp. 15V/14.4A
short-term also at 60°C (< 1 min)
Output is protected against short-circuit, open circuit and overload
0.64
0.54
Harmonic current emissions (PFC) see page 2
Transient
handling
Transient resistance acc. to VDE 0160 / W2
(750V/1.3ms), for all load conditions.
Hold up time
45,7 / 84,6 / 81,3ms (bei AC 100/120/230V,
12V/15A) (see Diagram overleaf)
IT Mains
Short-circuit current
21A min. ,28A max.
Ambient temperature
range Tamb
Operation: 0°C...+70°C (>60°C: Derating)
Storage: -40°C...+85°C
Derating
at Tamb = +50°C, cold start
Power factor
EMC and
Low Volt.
Directive
Output
Note: At DC input, always leave the switch in the 230V position
Input current In
UL508 LISTED
IND. CONT. EQ.
18 WM, 60°C
typ. 5 W/K
Voltage regulation
< - 150mV overall
(at Tamb = +60°C...+70°C)
Ripple / Noise
<50mVPP, (20MHz bandw., 50Ω measurement)
Serial operation
not allowed
Parallel operation
not allowed
Overvolt. protection
typ. 19V
Power back immunity
< 18V
Front panel indicator
Green LED on front panel
allowed
Efficiency, Reliability etc.*
(AC 230V, 12V/15A)
Construction / Mechanics*
Housing dimensions and Weight
120mm x 124mm x 102mm (+ DIN rail)
• WxHxD
above/below 25mm recommended
• Free space for
left/right 15mm recommended
ventilation
980g
• Weight
Efficiency
>87%
Losses
<26.9W (AC 230V, 12V/15A)
Connection
MTBF
425.000h acc. to Siemensnorm SN 29500
(12V/15A, AC 230V, Tamb = +40°C)
Lifetime expectancy
(electrolytics)
The unit uses longlife electrolytics, specified
for +105°C (cf. ’The SilverLine’, p.2).
0,5...4mm2 / 20...10 AWG
• Wire gauge
• Recomm. tightening 0,8Nm / 7lb.in
torque
• Wire stripping length 7mm / 0,275”
* For further information see data sheets „The SilverLine“,
„SilverLine Family Branches“ and mechanics data sheet
Screw terminals , input=3, output=4
Design advantages:
• All connection blocks are easy to reach as mounted at the front
panel.
Ordering information
Order number
Description
SL10.104
SLZ14
SLZ02
SilverLine switched-mode power supply
Adapter for S7-300 rail
Wall mounting set
sl10e104 / 060428
1/2
"
